Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


Settings of 2N® Helios IP intercom is very simple. You have to go to section "Services –> Onvif" and set there "Discoverable" mode as shown in the picture below. Then you have to create ONVIF account with "Administrator" access level. We used credentials hikvisionadmin/hikvision 2n for this FAQ.

Image RemovedImage Added

Finally RTSP stream has to be enabled on 2N® Helios IP. This setting is in the section "Services –> Streaming". You have to enable RTSP server and choose codec. Also please verify that "UDP Unicast Enabled" is checked. All these settings are shown in the picture below.