Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Following guide explains how to route the call directly to the defined extension number. The call on GSM side is answered after it is was answered on VoIP side.

Example: All calls routed to extension 100 in VoIP.

...

  • Mode: Set Accept incoming calls + dialtone or Accept incomming calls dial tone or Accept incoming calls + voice message (it works in the same way as if DTMF dialling timeout is dialling time-out is set on 0)
  • Minimum and Maximum digits in DTMF: Set correct length of number digits (for example if you want to dial 100, put 3, if you want to dial 10, put 2)
  • DTMF dialling timeout: Set dialling time-out: Set 0 which means that the gateway is does not waiting wait for any dialing dialling from a mobile user and the call is immediately routed to numbers in List of called numbers

...

  • Scroll down to List of called numbers and insert number of extension that you want to be dial automatically dialed. You can specify more numbers, if . If the first number is busy then the next number will be dialeddialled.

  • Gateway configuration/VoIP parameters: Verify that correct IP of your PBX is set so that the gateway knows where to send the call

...

Note: If you want to dial a different number in VoIP for incoming call on each SIM then put GSM modules in more incoming groups and set other groups in the same way, only with  a different number in List of called numbers.

...