Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This FAQ describes advantages of communication between 2N® Indoor Talk and 2N® IP intercom via Device ID and how to configure it properly.
How to communicate via IP address is described in this FAQ: How to setup call from/to 2N® IP Intercom
The aim of this page is to introduce how to communicate via 2N® IP intercom´s Device ID

Info
titleRequirements

We strongly recommend using the latest Firmware

  • 2N® Indoor Talk with the latest firmware - here
  • 2N® IP intercom with the latest firmware - here
  • no licence is needed
  • devices are in the same network, multicast is allowed in the network

...

Go to 2N® IP Intercom's web management - section Hardware - Switches and set the Switch code you want to use for activating the switch from 2N® Indoor Talk

Image Removed

 

Image Added

Make sure that the electric opener/lock is always connected to the intercom's 12V output using a security relay to make the installation safe. The motherboard relay is used for switching lights or other peripherals that do not have to be secured. 

It is always recommended that the 2N® Security Relay (Part No. 9159010) is used for increased security. 


 

Configuration of 2N® Indoor Talk

...