Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • for firmware 2.23.1 and older:
    As a very first step go to the section  "Directory – Users", enable the desired position in the Phonebook and set the "Phone Number" to be dialled once you press an appropriate button of the intercom. If you want to call to the 2N® IP Mobile application  (Intercoms) application running in the 2N® Indoor Touch 2.0 unit, the number has to be filled in a format: "device:name". In our example the device name “IDT” is being used, see please the picture below.

...

       As a next step go to the section  "Services - Phone - SIP 1" and fill in the "Domain" field. For direct calls from the 2N® IP Intercom to  2N® IP Mobile application it is recommended         to  IP Mobile  (Intercoms) application it is recommended to fill in the IP address of intercom as shown in the picture below (IP address of the intercom in this example is 192.168.50.10).

...

       As a next step go to the section  "Services - Phone - SIP 1" and fill in the "Domain" field. For direct calls from the 2N® IP Intercom to 2N® IP Mobile (intercoms) application it is recommended         to fill in the IP address of intercom as shown in the picture below (IP address of the intercom in this example is 192.168.50.10).

...