Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

2N® 2N IP Intercoms can be integrated with thermal IP camera to enhance overall security of access system.

...

Scenario is designed for camera to watch certain area in front of 2N® 2N IP Intercom and in case temperature exceed certain limit, it will trigger camera's alarm output which is connected to 2N® 2N IP Intercom Input 1. Once this happens, 2N® 2N IP Intercom will prohibit an access to door even for authorized user.

...

  • to be able to see person coming to 2N® 2N IP Intercom before that person can authenticate
  • to be able to see person standing right at 2N® 2N IP Intercom all the time
  • to be able to ignore person not coming or standing near 2N® 2N IP Intercom
  • (Optional) you can select specific area for thermal alarm in camera software in case thermal IP camera see too much of surrounding area

...

Connect thermal IP camera's output 1  to 2N® 2N IP intercom Intercom Input 1 (please see example for 2N® IP Verso)

...

  • which area it should watch
  • temperature level it should trigger an alarm
  • which output should be triggered when alarm happens (OUT1)

STEP 4

Access 2N® 2N IP Intercom configuration using your web browser and configure 2N® 2N IP Intercom to not allow access by inbuilt mechanism, because we will control it using an automation feature and access will be based on information we receive from thermal camera.

Disable Switch 1 in Hardware - Switches - Switch 1 section of 2N® 2N IP Intercom configuration

...

Enable Switch 2 in Hardware - Switches - Switch 2 section of 2N® 2N IP Intercom configuration and set it to trigger output connected to strike (lock).

...

Set an automation to prevent opening door if scanning device shorts the circuit connected from its OUT1  to input1 in 2N® 2N IP Intercom

Above automation will open lock for authenticated user only if thermal IP camera cleared the circuit.

...