This guide describes basic steps for configuration of peer to peer communication between 2N® IP Intercom and Grandstream GXV3175v2 IP phone. There is also a possibility to register both these devices to the IP PBX (SIP proxy server) and use internal dialling plan for calling between each other but it is not described in this FAQ. Grandstream GXV3175v2 is IP video phone with 7 touch screen colour LCD, integrated Wi-Fi and supporting many different features, audio codecs and video codecs (H.264, H.263 and H.263+). Very useful feature in GXV3175v2 is video preview – it means that you can see the video before you pick up the call. It is the easiest way how you can check who is standing in front of your door before you start to talk with him.
Note: Grandstream GXV3175v2 IP video phone is placed in the same LAN (local network) as intercom. IP address of GXV3175v2 is 192.168.50.196 and IP address of 2N® IP Intercom is 192.168.50.199. These IP addresses and names are used only such as example – please change it according to your names and network plan.
How to set 2N® IP Intercom?
Settings of 2N® IP Intercom is very easy. First of all create a new user and assign him a phone number – we will make SIP direct call (peer-to-peer call) to GXV3175v2 in our scenario. Therefore the number is set in the format: sip:IP_address (or sip:x@IP_address). See the picture below for more information.
In the next step we will move to the section "Services – Phone – SIP" and fill in the IP address of 2N® IP Intercom into the “Domain” field.
Finally we will modify the settings of Video codecs (section "Services – Phone – Video"). Set there the highest possible resolution (VGA or HD that is available only for 2N® IP Verso) and also modify the bitrate and framerate parameters if needed. Consider the bandwidth consumption during the settings.
How to set Grandstream GXV3175v2 IP phone?
The easiest way how to set up this IP phone is via web interface but you can also use touch screen of this phone and set all necessary parameters this way. Complete setting via web interface is described below.
In the first step you have to enable "Account 1" and set all necessary information for this account in the "General" section. We will set peer-to-peer connection between 2N® IP Intercom and GXV3175v2 therefore set the IP address of 2N® IP Intercom into the "SIP Server" field as shown below. Authentication ID and password aren´t used in this case.
Go to the “Call settings” section and modify the “Dial Plan” field based on the picture below. You can also copy this dial plan from the Account 2 or from the Account 3.
In the next step move to the section "Advanced settings – General settings" and check if the "Use Random Port" check box is empty.
Finally go to section "Maintenance – Call Functions" and set the Preview as a function for incoming calls. Thanks to this feature you can see the video from intercom before you pick up the call and start to talk with calling person. Don´t forget to confirm all previous settings by "Apply" button on the upper right corner!
Finally you can double check that GXV3175v2 was properly registered to the intercom and that you can make a call between these devices.
More product information: