This FAQ describes how to configure 2N® IP Mobile application with 2N® IP Intercoms. Application allows to see all intercoms connected to your LAN network as well as you can register it with SIP Proxy and use for communication with the intercoms even when you are not connected to your LAN network. Thanks to the application you can see all intercoms connected to the LAN, you are able to accept incoming audio/video calls, make outgoing calls to 2N® IP Intercom and also control locks connected to the intercom.
How to configure 2N® IP intercom?
As a very first step go to the section "Directory – Phone Book", enable the desired position in the Phonebook and set the "Phone Number" to be dialled once you press an appropriate button of the intercom. If you want to call to the 2N® IP Mobile application, the number has to be filled in a format: "device:name". In our example the device name “ipad” is being used, please see the picture below.
In the next step you can set the intercom to automatically pick up the incoming calls in order to easily reach it at any time. Go to the section "Services – Phone – Calls" and enable Automatic Pickup for incoming calls for both SIP1 and SIP2, see the picture below.
As a next step go to the section "Services - Phone - SIP 1" and fill in the "Domain" field. For direct calls from the 2N® IP Intercom to 2N® IP Mobile application it is recommended to fill in the IP address of intercom as shown in the picture below (IP address of the intercom in this example is 192.168.50.10).
How to set 2N® IP Mobile?
To be able to receive calls on the 2N® IP Mobile you need to set the device name first. The device name is used by the intercom for the call routing instead of the IP address. Please go to Section "Settings - Settings" and edit field "Device name". We choosed name "ipad".
The application automatically scans your LAN network and looks for all connected 2N® IP Intercoms. You can easily add them in the "Devices" section by opening "List of devices".
In the LAN devices list you can see all 2N® IP Intercoms available. By clicking on the specific row you can add selected intercoms only, or by clicking on "Select all devices" in upper corner you can add all of them at once.
Once you will get back to "List of devices" you will see there devices, you picked in previous step.
By selecting the desired 2N® IP Intercom in the list of Devices you can watch the video stream, place a call, open the door lock and also make an instant screenshot.
More product information: