Skip to end of metadata
Go to start of metadata

Info

Icon

This FAQ breifly describes how to connect/dissconect external LED diods to the 2N® Lift8 car unit in proper way without damaging it. Below you will find a few brief steps with photos which ilustrates the procces.

  1. Loosen 4 screws marked on the picture below. It is not necessary to release them! Once you will loosen them, then move the front plastic cover in direction showed in the picture below.



  2. Once you will move the front plastic cover, you will gain access to the connecters for connection/disconnection of external LED diods.