Skip to end of metadata
Go to start of metadata

2N® Network scanner is software for Windows based operating systems. It allows you to locate 2N devices by running quick network scan over networks connected to a computer.

2N devices which can be found using Network scanner are: 2N® IP Intercom FAMILY, 2N® Access Units, 2N® Indoor Touches,  2N® Lift IP units, 2N® SIP Speaker devices, 2N® Access Commander.

It will provide you with information about a device's IP address, name, serial number and version of installed firmware.

Additionally, software can also Browse device's web configuration by running your favorite web browser and Config IP configuration of detected 2N devices.

Step by step guide

  1. Locate 2N devices - after you run the software, it will scan connected networks and provide you with list of detected 2N devices.


    If you need to RESCAN connected networks, please click on File - Refresh:

    Or by right clicking on one device and choosing Refresh option:


  2. Change IP settings of a detected 2N device - by right clicking on detected device, you can choose to modify its IP settings by choosing the Config option


    In configuration, you can change between DHCP and static IP settings. You need to confirm changes by entering a password. This will be the password used for the Admin user.

    Icon

    Config option is available only for 2N® IP Intercoms and 2N® Access units on not grayed lines.

  3. Browse detected 2N device - by right clicking on a detected device, you can choose to Browse its web configuration using your favourite web browser

     You have the option to filter search results by typing into the filter box. You can filter for  IP address, serial number, display name or firmware version to be shown.