Skip to end of metadata
Go to start of metadata

You need to check following points:

  1. Signal quality – The quality of the signal must be in the range -65dBm and -85dBm in the module without call activity. You can check the quality of the signal in the configuration of the 2N® VoiceBlue Next (Gateway control –> Module control) or by using the command at&qall from the hyperterminal or putty.
  2. A Switch setting – Check, if the port is in the mode of FULL DUPLEX. Half duplex doesn't make sense for UDP RTP packet. In case there is just one call via this port, the quality can be satisfactory, but with more call traffic the issue with voice quality is present.

The best tool how to check if it´s caused by defective 2N® VoiceBlue Next or other things is to connect the 2N® VoiceBlue Next to the PC and make a direct SIP call from software phone as SJ phone. Use the called number in this format: sip:phonenumber@ipaddressofVoiceBlueNext.

More product information:

  • 2N® VoiceBlue Lite (Official Website 2N)