The 2N® Indoor Compact unit is designed for an audio and video communication with the 2N® IP Intercom. You can see all intercoms connected to the LAN, you are able to accept incoming calls, make outgoing calls to 2N® IP Intercom and also control locks connected to the intercom.
How to configure 2N® IP Intercom?
As a very first step go to the section Directory – Users, create a new user and set the Phone Number to be dialed once you press an appropriate button of the intercom. If you want to call the 2N® Indoor Compact unit, the number has to be filled in a format: "device:name". In our example the device name “IndoorCompact” is being used as on the picture below.
In the next step you can set the intercom to automatically pick up the incoming calls in order to easily reach it at any time. Go to the section Services – Phone – Calls and enable Automatic Pickup for incoming calls for both SIP1 and SIP2, see the picture below.
As a next step go to the section Services - Phone - SIP 1 and fill in the Domain field. For direct calls it is recommended to fill in the IP address of intercom as shown in the picture below (IP address of the intercom in this example is 192.168.50.10).
How to set 2N® Indoor Compact?
Once the 2N® Indoor Compact is connected to the local network, go to its web page - section Services - Phone - 2N Indoor Units.
To be able to receive calls from 2N® IP intercom you need to set the device name there. The device name is used by the intercom for the call routing instead of the IP address.
To be able to call from 2N® Indoor Compact to 2N® IP intercom go to 2N® Indoor Compact web page - section Directory - Devices and add the 2N® IP intercom to devices´ list. Devices´s list is available via 2N® Indoor Compact´s onscreen menu. To be able to activate 2N® IP intercom´s switch during call fill in Unlocking DTMF code as well.