2N® Indoor Touch 2.0 is able to receive calls from the Axis door stations. However there are some limitations.
Make sure that the SIP ports randomisation feature is disabled in the 2N® Indoor Touch 2.0 device.
Figure 1: 2N® Indoor Touch 2.0 settings
Secondly it is necessary to adjust the settings of the Axis Door Station. It is necessary to add or modify the existing account in the section VoIP / Account Settings.
Figure 2: Axis settings Account modification
In this section it is necessary to specify Domain name. In this example the domain name is the IP address 192.168.50.185 which is the IP address of the 2N® Indoor Touch 2.0.
Figure 3: SIP server setting
Next step is to add the proxy server address which is the IP 192.168.50.185 of the 2N® Indoor Touch 2.0.
Figure 4: Proxy settings
Last step is to configure DTMF code to be able to open doors. Add a new DTMF configuration and specify the code: 00.
Figure 5: DTMF settings
Once the DTMF code is specified it is necessary to setup the action based on the received DTMF code. This can be done in the section Events / Action Rules:
Figure 6: Action rules