AXIS A8004-VE – Peer-to-peer call to 2N® Indoor Touch

Skip to end of metadata

Added by Jašek Martin, 2N, last edited by Kendra Matěj, 2N on May 28, 2020 (view change)

Go to start of metadata

2N® Indoor Touch is able to receive calls from the AXIS door station A8004-VE. However there are some limitations.

Limitations

Icon

It is not possible to make a call from the 2N® Indoor Touch towards the AXIS Door Stations.
No video preview during the incoming call.
2N® Indoor Touch with firmware version 3.5.1 and later.
Tested with AXIS A8004-VE with firmware version 1.65.2.
IP address of AXIS A8004-VE: 10.0.14.50. IP address of 2N® Indoor Touch: 10.0.14.55. This is only an example, please change it according to your network requirements.

Configuration of 2N® Indoor Touch

Go to onscreen menu - 2N IP Mobile - Settings and disable SIP port randomisation feature

Configuration of AXIS A8004-VE

Go to web management - VoIP - SIP Settings and enable SIP.
Go to web management - Events - Recipients and add 2N® Indoor Touch´s SIP address as a new recipient.
Go to web management - Events - Action Rules and create a new Action Rule to call 2N® Indoor Touch by the call button.

Go to web management - VoIP - DTMF Settings and add DTMF Sequence for unlocking the door by 2N® Indoor Touch.

Go to web management - Events - Action Rules and create a new Action Rule to open the door when DTMF sequence is received during call.