Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

This FAQ describes advantages of communication between 2N Indoor Talk and 2N IP intercom via Device ID and how to configure it properly.

How to communicate via 2N Indoor Talk´s device name is described in this FAQ: How to setup call from/to 2N® IP Intercom

The aim of this page is to introduce how to communicate via 2N IP intercom´s Device ID

Requirements

Icon
  • 2N Indoor Talk with the latest firmware
  • 2N IP intercom with the latest firmware
  • no licence is needed
  • devices are in the same network, multicast is allowed in the network

Why to use 2N IP intercom´s hostname in 2N Indoor Talk´s configuration

Communication via network hostname is a proprietary way and thanks to that you can activate 2N IP intercom´s switch by 2N Indoor Talk when there is no call

 

Configuration of 2N IP intercom

Setup Intercom's Device ID

Go to 2N IP intercom´s web management - section Services - Phone - Local Calls and set the Device ID.

Setup Local Call receiving mode

Go to 2N IP Intercom's web management - section Services - Phone - Calls and there you set

Local Call Receiving Mode

  • Always Busy - no calls allowed
  • Manual Pickup - pickup call manually by press of a button, you must define which button picks the call(picture below)
  • Automatic - Intercom automatically picks up the call

Setup Intercom's Switch code

Go to 2N IP Intercom's web management - section Hardware - Switches and set the Switch code you want to use for activating the switch from 2N Indoor Talk

 

Configuration of 2N Indoor Talk

Go to 2N Indoor Talk´s web management - section Directory - Devices click on Search registered devices and choose the device you want to add.

After you have added the device the Device Name and Phone Number are automatically filled. 

  • You can call up to 2 devices from 2N Indoor Talk.
  • Start call with a short/long press: Choose whether you want to call this user by a short or a long press of a call button on the 2N Indoor Talk
  • Code after short press: Defines a DTMF code sent to the intercom during or outside the call
  • Code after long press: Defines a DTMF code sent to the intercom only during the call by long pressing the unlock button


 

  • No labels