The 2N® Indoor Touch unit is designed for an audio and video communication with the 2N® IP Intercom. You can see all intercoms connected to the LAN, you are able to accept incoming audio/video calls, make outgoing calls to 2N® IP Intercom and also control locks connected to the intercom.
- for firmware 2.24.0 and later:
As a very first step go to the section "Directory – Users", create a new user and set the "Phone Number" to be dialled once you press an appropriate button of the intercom. If you want to call to the 2N® Indoor Touch unit, the number has to be filled in a format: "device:name". In our example the device name “IDT” is being used, see please the picture below.
In the next step you can set the intercom to automatically pick up the incoming calls in order to easily reach it at any time. Go to the section "Services – Phone – Calls" and enable Automatic Pickup for incoming calls for both SIP1 and SIP2, see the picture below.
As a next step go to the section "Services - Phone - SIP 1" and fill in the "Domain" field. For direct calls from the 2N® IP Intercom to 2N® IP Mobile application it is recommended to fill in the IP address of intercom as shown in the picture below (IP address of the intercom in this example is 192.168.50.10).
Last step is to assign the contact to quick dial button.
How to set 2N® Indoor Touch?
Once the 2N® Indoor Touch is connected to the local network and powered (over PoE or using an external 12V DC/2A power supply) it will boot up and you see its initial screen (launcher). By clicking on the 2N® IP Mobile application icon in the right upper corner you can open it and access its settings.
To be able to receive calls on the 2N® IP Mobile you need to set the device name first. The device name is used by the intercom for the call routing instead of the IP address. Go to the section "Settings - Device name" and set the desired name, in our example we use "IDT", see the pictures below.
The application automatically scans your LAN network and looks for all connected 2N® IP intercoms. You can easily add them in the "Devices" section by clicking on the "+" button.
In the LAN devices list you can see all 2N® IP Intercoms available. By clicking on the specific row you can add selected intercoms only, or by clicking on the checkbox in the right upper corner you can add all of them at once.
By clicking on the confirmation button you have just added the desired local devices to the list and the application is ready to call.
By selecting the desired 2N® IP Intercom in the list of Devices you can watch the video stream, place a call, open the door lock, listen to the audio stream preview and also make an instant screenshot.
More product information: