Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Since the version 2.1 the maximal occupancy in a certain area can be newly set and monitored in 2N® Access Commander.

 

 

 

How to set up an area to manage the occupancy

 

  • in the 2N® Access Commander's web interface go to the Area restrictions section, where click on the NEW AREA button in the upper right,
    name it and confirm by clicking on CREATE:





  • then click the on the ADD button at the bottom of the DEVICES tab and then select the device (containing a total of at least 2 access points) and confirm by clicking on ADD:




    Icon

    For instructions to defining access points see this FAQ: Access points - defining access points in 2N® Access Commander since version 2.1





Setting up the occupancy limit itself

  • when the occupancy limit is reached, which can be set in the 2N® Access Commander's web interface in the Area restrictions section for the given area, you can choose between 3 "actions":       a) happens nothing        b) just a notification        c) access denied
    To set, click on the Occupancy mode field, where you enter the maximum number of people and the mentioned mode - then confirm by clicking on SAVE:







  • in the given area then on the field Current occupancy we can immediately see how many people, out of how many are allowed in it, are there:




  • In the Area restrictions section on the EXCEPTIONS tab you can also select groups or users by clicking on the ADD button,
    who will have access to the given area despite its full capacity (at the end we will confirm by clicking on ADD):





  • on the SETTINGS tab it is possible to select, under the Reset field, by clicking on ADD RESET TIME, the day of the week and the time when the area restriction status will be reset - also the number of users located in the given area is reset. It is possible to remove the set "reset" in this window, as well. Then confirm by clicking on SAVE at the bottom right:
     


 

 

 

Anti-passback function within the Area restrictions

 

  • In the 2N® Access Commander's web interface, in the Area restrictions section, in addition to the occupancy limit settings
    there are now also settings for the "Anti-passback" function:




  • v kolonce ANTI-PASSBACK zde po kliknutí na "Anti-passback" nebo na "Anti-passback timeout uživatele" můžete definovat typ Anti-passbacku
    (více k Anti-passbacku naleznete v tomto FAQ: Anti-passback - jak nakonfigurovat v Access Commanderu )
    a v kolonce "Timeout uživatele" (ve stejném okně) též dobu, za kterou bude uživateli umožněno znovu vstoupit (po porušení podmínek) do dané oblasti:

 

 

 

 

 

Widget funkce Obsazenost

 

Icon

Obecné instrukce ohledně používání widgetů jsou v následujícím FAQ: Dashboard a widgety (od verze 2.0) ve 2N® Access Commanderu

 

  • v sekci Dashboard můžete tedy přidat widget pro sledování Obsazenosti, kde rovnou vidíte, jak je kapacita vytvořených oblastí naplněna.
    Po kliknutí na symbol tří teček lze přejít na změnu filtru či si widget přejmenovat:




  • Po kliknutí na Změnit filtr můžete vybrat pouze některou, nebo některé, oblasti, které na daném widgetu budou.
    K tomu je nejprve zapotřebí deaktivovat volbu "Sledovat všechny oblasti" - viz na obrázku níže. Nakonec potvrdíme kliknutím na ZMĚNIT:

 

 

 

  • No labels