tested with 2N® SmartCOM PRO ETH equipped 868MHz WM-Bus module and WM-Bus meters using WM-Bus T mode.

at^scwmbus?

^SCWMBUS: "MODE",1

 

at^scwmbus="sniff"

CONNECT

^SCWMBUS: "BMP",14134845,31,08,-1,-70dBm

^SCWMBUS: "BMT",14166346,0A,07,-1,-78dBm

^SCWMBUS: "BMP",15800058,51,08,-1,-72dBm

DISCONNECT

OK

 

at^scwmbus="dev_add","BMT",14166346,0,0A,07                 - if 0 is set, all messages received from the meter are stored (minimum interval in seconds between two readings                                                                                                    range 0 - 600)

OK


at^scwmbus?

^SCWMBUS: "DECRYPT",0

^SCWMBUS: "MODE",1

^SCWMBUS: "RF_CHANNEL",1

^SCWMBUS: "PREAMBLE_LEN",0

^SCWMBUS: "INSTALL_MODE",0

^SCWMBUS: "MODULE_TYPE","RC1180-MBUS3,2.00,3.14"

^SCWMBUS: "CF_DISCARD",0

^SCWMBUS: "DEV_CNT",1

^SCWMBUS: 1> "BMT",14166346,0,0A,07

OK

at^scdata="get_oldest",2

^SCDATA: "WMBUS",1467636148,17096,-66,20,"44B409466316140A077A950800000C1305000000"

^SCDATA: "WMBUS",1467636181,17097,-66,20,"44B409466316140A077A960800000C1305000000"