For access you can utilise on 2N® IP Verso intercoms and 2N® Access Unit readers modern Bluetooth technology.
In 2N® Access Commander you can manage Bluetooth access in similar way as access using RFID cards or PIN codes.
In order to authorize users using Bluetooth, it is necessary to authorize mobile devices according to Bluetooth standard which is very secure!
This is process where you need to generate a pairing code in 2N® Access Commander that you then need to enter to 2N® Mobile Key app running on mobile device.
Requirements:
2N® Access Commander the latest version, this guide created on 1.14.0 version
2N® Access Unit or IP Verso with the latest firmware, this guide created on 2.28.0 version, equipped with Bluetooth module
Mobile device (for example smartphone) supporting Bluetooth v4.0 a higher, with installed 2N® Mobile Key app, active Bluetooth (and GPS locating for Android phones).
In this article is described process how to setup Bluetooth from the beginning. If you already have added intercom in your 2N® Access Commander installation to zone correctly and users in groups so they can be connected with corresponding zones using access rules,pleae continue with step 6 in this guide. |
Go to section Access Rules, create an access rule and connect zone from step 3 with user group created in step 4 of this guide.
(Optionally you can create time profile when such rule is active.)
Previous steps are described also in this video tutorial *Video - Basic setup - How to setup access and phone numbers in 2N® Access Commander |
In few moments 2N® Access Commander shows generated pairing code. User needs to enter this code in 2N® Mobile Key app in next step 10.