This FAQ describes advantages of communication between 2N® Indoor Talk and 2N® IP intercom via Device ID and how to configure it properly.
How to communicate via IP address is described in this FAQ: How to setup call from/to 2N® IP Intercom
The aim of this page is to introduce how to communicate via 2N® IP intercom´s Device ID. 

We strongly recommend using the latest Firmware

  • 2N® Indoor Talk with the latest firmware - here
  • 2N® IP intercom with the latest firmware - here
  • no licence is needed
  • devices are in the same network, multicast is allowed in the network

Why to use 2N® IP intercom´s Device ID in 2N® Indoor Talk´s configuration

Communication via Device ID is a proprietary way and thanks to that you can activate 2N IP intercom´s switch by 2N Indoor Talk when there is no call. 

Configuration of 2N® IP intercom

Setup Intercom's Device ID

Go to 2N® IP intercom´s web management - section Services - Phone - Local Calls and set the Device ID.

Setup Local Call receiving mode

Go to 2N® IP Intercom's web management - section Services - Phone - Calls and there you set

Local Call Receiving Mode

Setup Intercom's Switch code

Go to 2N® IP Intercom's web management - section Hardware - Switches and set the Switch code you want to use for activating the switch from 2N® Indoor Talk


Make sure that the electric opener/lock is always connected to the intercom's 12V output using a security relay to make the installation safe. The motherboard relay is used for switching lights or other peripherals that do not have to be secured. 

It is always recommended that the 2N® Security Relay (Part No. 9159010) is used for increased security. 


 

Configuration of 2N® Indoor Talk

Go to 2N® Indoor Talk´s web management - section Directory - Devices click on Search registered devices and choose the device you want to add.

After you have added the device the Device Name and Phone Number are automatically filled.